You are currently viewing our boards as a Guest which gives you limited access to view most discussions and access our other features. By joining our free fishing community with over 49,500+ anglers you will have access to read the message boards, post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely Free so please, join our fishing community today!
Please note we require a valid email account from a service provider or company email. Because of spam we do not accept registrations from free email account. If you have any problems with the registration process or your account log-in, please contact contact us Thanks, Brandon Chief Angler, TidalFish.com
Here is your chance to get a like new boat at a used price. Brand new Yami 150 4 stroke! She is a 2000 21 Parker SE that was indoor rack stored through 2007. She has had just 1 owner, me! Bottom painted for the first time in 2008 and in a slip for the first time but only since May of 2008. She is exceptionally clean.
She is in the process of being re-rigged with a brand spanking new Yamaha 150 4 stroke. You will have the full warranty period! You can have this boat with a virgin engine. You can be the one to break this new engine in. I figured I would post her now and when the dealer is done rigging her then I will post pictures.
Also she is equipped with a 2008 Minn Kota RipTide ST 101 lb thrust bow mounted trolling motor. This motor has both co-pilot and auto-pilot features. The mount is detachable so on those days you want to fish the flats you can put it on and on those days you feel like heading to Montauk, leave it home. I did all the rigging on the trolling motor and took special care to conceal the trolling motor connections inside the anchor locker for a clean and neat look. 3 Series 27 deep cycle batteries and a 3 bank Minn Kota on board 45 amp charger are included.
Also, I had a Birdsall casting platform custom made for her in matching Parker gelcoat. The platform is very helpful in flats fishing in that you can cast off of it or use it as a step to get up even higher to fish the top bow deck. The platform is detachable and I took special care in not making any holes in the floor to secure it. When fishing the flats I will climb to the top deck and sight fish and control the direction and speed of the boat with the wireless keyfob that comes with the electric motor.
New this year also is a Humminbird 797 Sidefinder/GPS unit with the Navionics Gold chip. I have installed 3 transducers. 1 transducer is externally mounted on the stern and is the “slow” speed sidefinding/ up and down transducer. The 2nd ducer is installed in the bilge and is a shoot through the hull puck - up and down - for “high” speed. I have installed a transducer switch to switch from one ducer to the other. The 3rd ducer is mounted on the trolling motor and is a “sidefinding/up and down” transducer. I have a second unit station installed at the bow so when I am up front fishing I can pop the Humminbird unit of of the console and pop her up in the bow. Again when not in use there are no holes or wires visible. So, when you are not using the unit up front you don’t even no what is there.
She has a Raymarine vhf radio and Shakespeare whip antenna.
Flush mounted cleats. No bow rail.
Trim Tabs.
Also, I had custom Sunbrella covers made for her console and leaning post.
I fly fish almost exclusively and she is equipped with 10 Bluewater designs fly rod holders. These holders also hold spinning rods as well.
Also, included is a dual axle Venture trailer with hydraulic brakes.
The boat is in the Old Saybrook area of Connecticut.
A brand new one outfitted like this and I think you’re talking well over $40,000.
