Reply With QuoteThird wire is for float switch over-ride. instruction sheet should explain.
Results 1 to 4 of 4
Thread: New Bilge Pump Help
-
08-02-2008, 07:51 PM #1
Average TF Poster - Not a Tidal Fish Subscriber
- Join Date
- Jul 2006
- Posts
- 122
New Bilge Pump Help
Hey guys,
Please excuse me if this question is a little "stupid" but Im trying to learn here. My bilge went up in my CC 2 days ago. I went out and got my replacement, detached the old bilge hose and inspected my wires...I then noticed that I have 3 wires connected from the boat to the bilge. My new bilge has only 2 wires for connection...So my question is: do I combine 2 wires into one, or are there bilges made for a 3 wire hookup?
Thanks in advance for helping a youngin'!
-
08-03-2008, 04:54 PM #2
New TF Poster - Not a Tidal Fish Subscriber
- Join Date
- Jul 2002
- Posts
- 17
-
08-03-2008, 05:14 PM #3
Average TF Poster - Not a Tidal Fish Subscriber
- Join Date
- Jul 2006
- Posts
- 122
Thats the thing....I didnt see anything on the manual or instruction sheet about the float switch over ride. Well see!!! Ill let you know how I made out.
-
08-03-2008, 06:26 PM #4
Average TF Poster - Not a Tidal Fish Subscriber
- Join Date
- Jul 2006
- Posts
- 122
I got it all figured out and the bilge working perfectly...thanks for the help!
Posting Permissions
Link to Us Subscription Information Advertising Information Terms of Service Privacy Policy Resources Contact Us About Us
©2012 TidalFish.com. All Rights Reserved.