Tidal Fish Forum banner

Lowrance Side Scan etc Installation

Need some Help 
1K views 6 replies 7 participants last post by  BradH 
#1 ·
Hope this isn't the wrong forum for this question But...... I am looking for an installer who is familiar with Lowrance to install the Lowrance sidescan in my Parker 21se. I currently have the HDS7 installed. My boat is at the Oak Grove Marina in Edgewater, MD. Additionally I want to install the Lowrance SP-BL Speed Sensor 99-96. Hopefully someone can point me in the right direction towards a knowledgeable, reasonable and honest installer. Thanks in advance. :help:
 
#4 ·
It is not rocket science - if you are the least bit handy - Do It Yourself! Save hundreds!

Running the "fish-tape" through the boat's conduit and pulling the wires is the only hard part.

And use 3M 5200 on ALL screws to avoid your boat getting a wet transom.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top