Results 1 to 8 of 8
  1. #1
    baldpate Guest & Not Registered

    Default Looking for Outboard Recommendations

    After a pretty exhaustive search I stumbled on a a 1998 17' Carolina Skiff, trailer and 50 hp Evinrude deal - after doing some serious negotiation I purchased the boat last night.

    I DO NOT plan to keep the Evinrude even though it runs fine(i.e. I'll probably sell it in the next several weeks) and I am now looking for recommendations for a new outboard. I am going to use this boat primarily for crabbing (trotlining) but may fish a bit at the mouths of rivers and close by in the bay on the right days.

    I respect and value the opinions of those on the board and am soliciting advice as to what outboard to buy - I am leaning heavily toward a 4-stroke something for good gas consumption.

    Can I get your feedback including WHERE you would and would not buy?

    Thanks - Baldpate


  2. #2
    Join Date
    Jul 2001
    Posts
    206

    Default Looking for Outboard Recommendations

    ive got an 18' lowe side console with an 80 yamaha 4 stroke it is an incredible motor, good on gas, real quiet couldnt ask for more and would recommend to anyone, get the biggest motor your boat is rated for you can always trade down

  3. #3
    Join Date
    Dec 2004
    Posts
    136

    Default Looking for Outboard Recommendations

    Ed's Marine north of Richmond has good prices on yammy 4 strokes, give them a call and they price them out for you.

  4. #4
    Join Date
    Jul 2003
    Posts
    1,278

    Default Looking for Outboard Recommendations

    RJ made a good point. Delaware is the place to purchase an outboard, No Tax. Rudy Marine, Wimington quotes the same prices on Yamaha as Eds. The only difference, again, no tax. It's your money

  5. #5
    POLECAT's Avatar
    POLECAT is online now Tidal Fish Commerical Lite Subscriber - My business supports Tidal Fish
    Join Date
    Jul 2001
    Posts
    4,179

    Default Looking for Outboard Recommendations

    Just a little "HYPE" from BRP about the new E-Tecs.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Issue Date: 4/7/2005, Posted On: 4/7/2005

    E-TEC scores a first with EPA award


    BRP Inc. tonight will receive the Clean Air Excellence Award from the U.S. Environmental Protection Agency for its Evinrude E-TEC outboard engine.



    “This is the first time ever a marine engine manufacturer has received an award of Clean Air Excellence by the EPA,” said Roch Lambert, vice president and general manager of BRP’s outboard division, in a statement.



    Stephen L. Johnson, the EPA’s acting administrator, will present the award to BRP executives at a ceremony in Washington, D.C. The award recognizes innovations that help improve air quality. EPA says the Sturtevant, Wis., company was selected because its E-TEC technology has redesigned engine technology for boating.



    “The EPA jury originally thought they would have to go to a 4-stroke engine to achieve such important air quality benefits,” said Jose Boisjoli, president and CEO of BRP, in a statement. “We’ve demonstrated that our E-TEC … carbon monoxide emissions are typically 30 to 50 percent lower than a similar 4-stroke engine and, at idle, are lower by a factor of 50 to 100 times.”



    BRP says the engine meets 2006 EPA, European Union, and 2008 California Air Resources Board 3-Star ultra-low emissions standards.



    “This is a great achievement because it testifies to our capacity to marry high performance 2-stroke technology and environmental protection benefits,” said Boisjoli. “I’m honored to receive the U.S. EPA Clear Air Excellence Award on behalf of our employees.”
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the E-Tecs burn that clean, I doubt there will be a big buildup of carbon inside the cylinders and in the ring grooves. But what do I know, I'm just a crabber using 1981 Johnson technology.[grin]

  6. #6
    Join Date
    Mar 2003
    Posts
    1,008

    Default Looking for Outboard Recommendations

    careful Jerry....I've been using my "Johnson Technology" for nearly 20 years, and it hs done nothing but get me in trouble[grin][grin]

  7. #7
    Join Date
    Jul 2001
    Posts
    685

    Default Looking for Outboard Recommendations

    That is great news but show me a work order after 3years of not being serviced and I will be convinced.

  8. #8
    bowT is offline TFer who Posts Some - Not a Tidal Fish Subscriber
    Join Date
    May 2003
    Posts
    41

    Default Looking for Outboard Recommendations

    What are you asking for the 50 Env?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Link to Us   Subscription Information   Advertising Information   Terms of Service   Privacy Policy   Resources   Contact Us   About Us

©2012 TidalFish.com. All Rights Reserved.