Tidal Fish Forum banner

Sonar/Ducer failure

891 views 1 reply 2 participants last post by  kapoc 
#1 ·
My sounder is only reading about 7' of water when I'm in about 50'. I tried messing with the gain and put it on auto, still reads anywhere from 4 -9' even in the channel under the bay. I'm thinking this is my transducer giving up, any ideas?
 
#2 ·
Just quick off the wall try to push the up button or down button to see if a little line moved you might have it only looking at the first 7 ft. If the boat is on a triler ook at the transduceer face to see the angle and if it is messed up any if in the water well then do the same just involves getting wet to do it. Also a picture and model of the unit would help too.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top