Tidal Fish Forum banner

Repairing connection between Deck and Hull

3K views 1 reply 2 participants last post by  SteveL 
#1 ·
Have a 5/8 gap at bow to about 2 feet on both sides from bow. Anyone have any ideas or suggestion on how to tighten this up. I am removing all the rivets and screws that tie the boat together anf also removing all caulking between too. would like some input about putting the best way of putting this back together.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top