Tidal Fish Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
71 Posts
Discussion Starter · #1 ·
I am replacing my drum brakes with new Kodiak disks and have an Atwood surge actuator on my trailer. I need to pierce the check valve so that it will not hold any residual pressure. Does anyone know how and where it is located on the actuator?
 

·
Registered
Joined
·
365 Posts
Just be careful most of the brake manufacturers do not want you to modify a drum brake actuator to work with disc brakes. This may viod your warrenty just check it out before you do. You can get a quality disc brake actuator for around $100.
 

·
Registered
Joined
·
71 Posts
Discussion Starter · #4 ·
I have a 90 deg brass elbow screwed into the back of the black reservoir on the mechanism. Do I remove the 90 deg elbow and then will I see it? Or is it part of the 90 deg elbow? Can I hurt the unit if I use an ice pick and go too far?
 
1 - 4 of 4 Posts
Top