Tidal Fish Forum banner
1 - 2 of 2 Posts

· Registered
891 Posts
Discussion Starter · #1 ·
I had a wheel bearing failure on I-95 and limped into Stafford Shell at the 140 exit.

They were gracious and let me park on their lot from 6 pm Friday until noon on Saturday, including sleeping in my van and using their restroom.

It took about 8 hours labor go get the old melted bearing out, locate new ones (the NAPA in Stafford was extremely helpful), and get everything put back together again.

Stop by and fill up if you get the chance. Tell them you heard they were Good Guys!


· Premium Member
26,905 Posts
Good to hear of kind people :thumbup::thumbup:. Glad you could find parts close by.
I learned long ago to carry a spare hub with greased bearings - if you trailer a boat - sooner or later you will have trouble.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.