Tidal Fish Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
636 Posts
You should be able to touch the cylinder heads if not overheating ... if the tstats are the same as my '95 150's, they're set for 143°F. Water temperature at the telltale doesn't reveal much. One of my motors has pretty hot discharge water, the other just warm, but both run about the same temperature (I have gauges).

Was the alarm steady or intermittant (i.e. beep pause beep pause ...etc)? Intermittant is an oiling system alarm. What did the alarm and motor do on restart (any more alarms)?

Jim
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top