Tidal Fish Forum banner
1 - 1 of 1 Posts

· Premium Member
Joined
·
26,897 Posts
If you are handy - take it apart and see if the tiny lock nut on the level wind shaft (on the handle side) came off.I've had two do that.I put them back on with Loc Tite.You need to be careful how tight you go- too tight and it won't turn.

The sugguestion on the stripped gear is also very good advice.Once apart- you'll see how it works.It is nothing hard to understand.Be sure to lube the gears while it is apart.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top