Tidal Fish Forum banner
1 - 5 of 5 Posts

· Registered
16 Posts
You can probably repair it yourself. Tip tops are usually held on by ferrule cement or a fast drying epoxy. Heating the shaft of the tip top with a candle or lighter will loosen the epoxy and you can remove the tip top. Most tackle shops sell replacement tip tops and epoxy or ferrule cement to repair rods. If your rod is a heavy saltwater rod, I would use the five-minute epoxy.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.