Tidal Fish Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
805 Posts
Discussion Starter · #1 ·
It has been many years since I changed the seals in my boatss hydralic steering and now it is to do it again. There are a few things that I just forgot "how to" like.. do I need to remove the support rod nut (hose to the cylinder) to remove and replace the End Gland or just leave in place? I have a single station and one cylinder.

Thank you for your help.
 

·
Registered
Joined
·
877 Posts
Make sure the vent cap isn't bad, Mine did the same thing, replaced the seal, next time out, still leaked, found out about the vent cap, prob solved.
 
1 - 3 of 3 Posts
Top