Tidal Fish Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
184 Posts
Discussion Starter · #1 ·
I replaced the drum brakes on my single axle trailer the other week using the kit that I got from West Marine. That worked fine! Had to replace the brake line from the actuator to the brakes as well. That also worked fine! Down the road I go. Problem now is that there is too much travel in the coupler. When I brake or back up, the coupler travels into the box of the the actuator. The brakes work, but the coupler lock bangs into the box.
Re-bled and adjusted the brakes, same result.
Does the actuator need to be replaced, or can I rebuild the "master cylinder" part inside? Who has these parts? The actuator sells for $225 at West Marine.
 
1 - 3 of 3 Posts
Top