Tidal Fish Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
242 Posts
Discussion Starter · #1 ·
I have an 18ft cc Angler with a 90 hp on it . The Angler has a cut out transom . I was recently given a transom mount trolling motor. I would like to use this but I believe it won't fit where the cut out is . I believe it will be in the way of steering my motor. I would appreciate any advice and even picture would be great.
 

·
Premium Member
Joined
·
571 Posts
I'm pretty sure the picture of the trolling motor setup is supposed to come from you. Put the trolling motor on your transom. Turn the motor lock to lock. Put some pictures up if you are unsure it will work.
 

·
Registered
Joined
·
2,589 Posts
Most likely you will need to buy a bracket for the trolling motor and mount it off to the side a bit.
Relatively common problem.
A quick Google search produced brackets from 50.00 on up.
 
1 - 3 of 3 Posts
Top