Tidal Fish Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Has anyone here of a easy and good wiring diagram or picture to basically put togother thE following: Im installing it on a sailfsih with TTOP.
LOWRANCE HDS-10 WITH 50/200 TRANSDUCER AND EXTERNAL ANTENNA.
LOWRANCE SIRUIS SATELITE ANTENNA
LOWRANCE STRUCTURE SCAN
LOWRANCE BR-24 RADAR.
Simrad rc-42 compass heading
Navico expansion port---I'm using the port to keep my structure scan off when not needed.

Please Help
 

·
Registered
Joined
·
636 Posts
Add a spade fuse block, or blocks.. That's what I did. I used three total. I have everything you listed and more. And that includes two NEP-1 expansion ports.
Use on/off switches for Sirius, LSS-1, and the NMEA2000 network that you will need to use the RC-42 heading sensor. I also put the expansion ports on a switch.

http://bluesea.com/category/5/21/productline/126
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #4 ·
THANKS i HAVE TO CHECK ON HOW MY RC-42 IS CONNECTED . I GOT EVERYTHING TO WORK EXCEPT THE RADAR OVERLAY.
 
1 - 4 of 4 Posts
Top